WaterWorld 48-6800 LFP 6.8 kWh battery 48V with battery charger
WaterWorld 48-6800 LFP 6.8 kWh battery 48V with battery charger
WaterWorld has developed state-of-the-art lithium Ionbase battery packs that are fully integrated with the WaterWorld drivetrain. This ensures that the entire system operates smoothly and reliably.
That's why we offer a one-year additional system warranty when the WaterWorld drivetrain is combined with WaterWorld lithium batteries. This ensures an optimal boating experience.
- longer lifespan
- up to 3x smaller and lighter compared to lead acid
- more power and 100% discharge
- no maintenance + plug and play installation
- 3-year system warranty: Private users receive a 3-year warranty on a complete drivetrain consisting of a WaterWorld engine, lithium battery, and accessories, instead of 2 years.
- sustainably built
- better for the environment
- long cycle life
- reduced heat accumulation
- robust aluminum housing
- increased safety due to better chemical stability
- recyclable
- no cobalt
- service battery
- compact in size
- water resistant
- Compatible with new and existing WaterWorld motors . This lithium battery can be combined with existing WaterWorld motors. This modern, safe, and Dutch-developed battery integrates easily into the WaterWorld drivetrain through plug-and-play. The motor, controller, throttle, batteries, and display work seamlessly together via a CAN data connection.
- Product and customer safety are top priorities. Therefore, the most stable lithium chemistry available on the market is LiFePO4.
- It smart battery management system (BMS) protects the battery and cells from all situations such as high or low voltages, excessive current and extreme temperatures.
- Depending on the user's energy needs, 1 to 4 batteries can be connected.
The robust aluminum 3.5 mm thick housing is extremely strong and durable. The aluminum acts as a heat sink to
To cool the battery. This increases the lifespan of the cells and the safety of the battery.
Communication with the WaterWorld drivetrain allows us to tailor the battery to the system's needs. This results in
longer battery life, higher uptime and
a generally more reliable system.
The cylindrical cells Accumulate less heat compared to prismatic cells. This means greater safety, uptime, service life, and higher power output.
The battery consists of 352 individual cylindrical cells. Each cell is individually protected and equipped with a vent cap for even greater system safety.
Cylindrical cells are also more stable compared to prismatic
cells and are less likely to have internal short circuits from the reasons for thermal runaway.
- Net capacity 6500 Wh
- Nominal voltage 51.2 Volt
- Fully charged voltage 58.4 Volt
- Fully discharged voltage 43.2 Volts
- Maximum discharge current 100 Ampere
- Weight 60 kilograms
- Dimensions (L x W x H) 650 mm x 253 mm x 213 mm
- Volume 35.6 Liter
- Battery chemistry Lithium iron phosphate (LFP) LiFePO4
Battery Management and Safety - On/Off Button Yes
- Cell balancing Yes
- High current and short-circuit protection Yes
- Deep discharge protection Yes, cut off at 43.2 V
- Protection against polarity reversal Yes
- Individual cell string voltage measurement Yes
- Current interruption device (CID) for each cell Yes
- Security guard for each cell Yes
- Cell temperature measurement Yes
- Temperature measurement of battery electronics Yes
- Low temperature shut off Yes
- High temperature shut off Yes
Lifespan Information - Maximum number of cycles >4000 cycles with 80% depth of discharge at 25 °C with a capacity loss of 20%
- Average annual capacity loss
- Approximately 2% at 25°C ambient temperature
Battery Composition - Battery housing material Aluminum
- Cell type Cylindrical
- Capacity per cell 6 Ah
- Nominal voltage per cell 3.2 V
- Cell connections 16S 22P
- Information System in Combination with WW Drivetrain
- Accurate SOC display Yes
- Battery status indicator Yes
- Error identification Yes
Usage Information - Ambient temperature, discharged -10°C to +45°C
- Ambient temperature, charging -2°C to +40°C
- Ambient temperature, storage -25°C to +55°C
- Storage time without adverse effects at 50% SOC 40 weeks without load (battery switched off)
- Max connections Up to 1 in series and 4 parallel
- Max fast charging current 100 Ampere
- IP rating IP67 completely dustproof and waterproof up to 1 meter depth
Comparison Information - Energy density (weight) 108 Wh/kilogram
- Energy density (volume) 182 Wh/Liter
- Power density (weight) 108 W/kilogram
- Power density (volume) 182 W/Liter
-
Battery charger WaterWorld 850 Watt 4 A
- Inlet voltage 220Volt AC +/- 20%
-
Output current 15 Ampere
Battery charger WaterWorld 2000 Watt
- Inlet voltage 220Volt AC +/- 20%
- 9 A
- Inlet current ≤13 Ampere
- Output voltage 56.8 Volt
- Output current 35 Ampere
- IP 66: Completely protected against dust and waterproof to rain and waves of water.
- Air-cooled
- Weight 3.8 kg
- Dimensions (L x W x H) 282 mm x 168 mm x 90 mm
- Surge protection
- Overcurrent protection
- Charger overheating protection
- Reverse polarity protection
- Efficiency >95%
- Inlet voltage AC 90-265 Volt
- Plug inlet Type F, European standard
- Cable length input 140 cm
- Anderson SB50 plug outlet
- Cable length output 120 cm
- Warranty 2 Years
- Price inclusive the 15 ampere battery charger (for 19.5 kWh and or more including the 35 ampere battery charger), BatteryLink and data cables.
- Discount for multiple batteries. Larger battery packs up to 108 kWh available upon request.
- Download the brochure
- Battery and battery charger manual
Low stock: 1 left
Couldn't load pickup availability
Share












