ePropulsion G102-100 LiFePO4 Battery 10 kWh 96V

10240 Wh LiFePO4 battery .

• Compatible with the ePropulsion I-10, I-20, I40, H-100 Electric Inboard Motor 10-100 kW 96 V. Through its internal communication protocol, the G102-100 can provide battery status information and highly accurate data (e.g., SOC). The battery works in synergy with the outboard/inboard motor and the energy system, providing an optimal experience.
• Of course you can also connect other 96 Volt motors.
• This even allows you to sail for 10 hours at cruising speed with a boat weighing up to one tonne.
• Subsidy : Electric boat motors and lithium batteries are eligible for the Environmental Investment Deduction and the Arbitrary Depreciation of Environmental Investments for commercially used vessels. With the MIA/Vamil, the tax benefit can amount to over 14% of the investment amount.
  
  
• Complete protection thanks to the robust construction and reliable battery management system.

• The full metal housing is reliable, weatherproof,
  impact-resistant and drop-resistant.

• IP 67 Waterproof: Immersion-proof (no water ingress when submerged (30 minutes at 1 meter)).

• Easy to install: Connectors can be installed with just ONE hand.

• LiFePO4 is the best battery (and therefore better than Lithium-ion):
  • Safe: LiFePO4 is chemically stable and non-flammable. It can also withstand high temperatures without decomposing. Ultimately, you don't have to worry about it exploding or catching fire during use.
  • Durable: Use this battery daily, and you can even use it for 8 years. LiFePO4 batteries have a long lifespan, and the fact that they are rechargeable makes them durable. Essentially, you can use a LiFePO4 battery over and over again. LiFePO4 is a non-toxic material and doesn't emit hazardous or dangerous fumes, making it safe for you and the environment.
  • Long-lasting: A lithium LiFePO4 battery doesn't need to be fully charged to be used. The battery can also be quickly discharged without damaging the cells. LiFePO4 batteries have a low discharge rate, meaning they can remain in use for months without running out of power or causing permanent damage. They also have a longer and better life cycle.
  • Efficient: Charging a lithium LiFePO4 battery is easy. It also charges faster than other batteries. It also requires no maintenance, meaning you experience minimal downtime and maximum productivity when using lithium LiFePO4 batteries. Lithium LiFePO4 batteries are also lighter.
  • Performance: Lithium LiFePO4 batteries have an optimal energy density in both volume and weight and have a good specific energy amount, which means the battery can deliver the necessary power when needed.

SPECIFICATIONS

• Article number GB-0100-01
• EAN:
• Capacity: 10240 Wh / 100 Ah
• Maximum discharge current in amperes. Therefore, the maximum power output in kW.
• Weight 100 kilograms
• Dimensions: 680 x 500 x 300 mm
• Battery type Lithium-Iron-Phosphate
• Battery life: After 3000 cycles at 80% DoD (discharge rate), the battery remains at 80% capacity .
• Nominal voltage: 102.4 Volts
• Cut-off voltage: 83.2 Volt
• Maximum charging voltage: 115.2 Volts
• Charging time: hours
• Parallel connection: up to 8 in a single cluster. Multiple clusters are possible within the system.
• Connection in series: not possible
• Discharging temperature: -10 °C to 60°Celsius
• Charging temperature: 0°C to 55 °Celsius
• Mounting position:
• Cell configuration: 32S1P
• Communication: One CAN for ePropulsion motors / One CAN (two ports) for parallel batteries / One CAN for charger
• Approvals: CE, UKCA, FCC
• Battery management system: Included
• Shipping Classification: UN3480, Class 9, UN38.3 Certified
• 3D technical drawing (.step file)
• Manual
  • The battery charger can be permanently installed in the boat as it water resistant Use a splash-proof 220-volt extension cord to connect the battery to a wall socket or generator.
  • Item number: GB-C001-00
  • EAN:
  • Water resistant class IP x
  • Max output power: x Watt
  • Max output voltage: x Volt
  • Output current: 16 Ampere

  • To charge a G102 battery at 220V with a 16AMP charger, you need 16x220V = 3520W (real power without loss). It can also be connected to a generator with pure sine wave output.

  • Input voltage (AC): 185V - 255V (220V), so simply plug it into a wall socket. With an input voltage of 110VAC to 220VAC, it can be used worldwide.
  • Dimensions: mm
  • Battery charger manual
  • Brochure