ePropulsion G102-100 10 kWh / G102-230 24 kWh 96V LiFePO4 Battery
ePropulsion G102-100 10 kWh / G102-230 24 kWh 96V LiFePO4 Battery
- Compatible with the ePropulsion I-10, I-20, I40, H-100 Electric Inboard Motor 10-100 kW 96 V. Through its internal communication protocol, the G102-100 can provide battery status information and highly accurate data (e.g., SOC). The battery works in synergy with the outboard/inboard motor and the energy system, providing an optimal experience.
- Of course you can also connect other 96 Volt motors.
- This even allows you to sail for 10 hours at cruising speed with a boat weighing up to one tonne.
-
Subsidy : Electric boat motors and lithium batteries are eligible for the Environmental Investment Deduction and the Arbitrary Depreciation of Environmental Investments for commercially used vessels. With the MIA/Vamil, the tax benefit can amount to over 14% of the investment amount.
- Complete protection thanks to the robust construction and reliable battery management system.
-
The full metal housing is reliable, weatherproof,
impact-resistant and drop-resistant. - IP 67 Waterproof: Immersion-proof (no water ingress when submerged (30 minutes at 1 meter)).
-
Easy to install: Connectors can be installed with just ONE hand.
-
LiFePO4 is the best battery (and therefore better than Lithium-ion):
- Safe: LiFePO4 is chemically stable and non-flammable. It can also withstand high temperatures without decomposing. Ultimately, you don't have to worry about it exploding or catching fire during use.
- Durable: Use this battery daily, and you can even use it for 8 years. LiFePO4 batteries have a long lifespan, and the fact that they are rechargeable makes them durable. Essentially, you can use a LiFePO4 battery over and over again. LiFePO4 is a non-toxic material and doesn't emit hazardous or dangerous fumes, making it safe for you and the environment.
- Long-lasting: A lithium LiFePO4 battery doesn't need to be fully charged to be used. The battery can also be quickly discharged without damaging the cells. LiFePO4 batteries have a low discharge rate, meaning they can remain in use for months without running out of power or causing permanent damage. They also have a longer and better life cycle.
- Efficient: Charging a lithium LiFePO4 battery is easy. It also charges faster than other batteries. It also requires no maintenance, meaning you experience minimal downtime and maximum productivity when using lithium LiFePO4 batteries. Lithium LiFePO4 batteries are also lighter.
- Performance: Lithium LiFePO4 batteries have an optimal energy density in both volume and weight and have a good specific energy amount, which means the battery can deliver the necessary power when needed.
-
ePropulsion G-Series Batteries (96V)
The G-series consists of high-quality Lithium Iron Phosphate (LiFePO4) batteries, specially designed for larger marine applications. They are the ideal power source for the more powerful ePropulsion engines, such as the I-series (inboards), X-series (outboards) and the Pod Drive eSSA series .
Key Features
-
High Energy Density: Up to 3 times more energy density and 70% lighter weight than traditional lead-acid batteries.
-
Long Life: Up to 3,500 charge cycles (at 80% DOD), which is much longer than conventional batteries.
-
Maximum Safety: Equipped with an intelligent Battery Management System (BMS) and a fire-resistant honeycomb structure between the cells.
-
Easy Installation: Connectors can be connected with one hand without any additional tools.
-
Rugged & Waterproof: A full metal housing that is impact-resistant and meets the IP67 waterproof standard.
-
Fast Optimized: Supports 1C fast charging, allowing the battery to be fully operational again in a short time.
Specifications Comparison
Feature G102-100 G102-230 Capacity 10,240 Wh / 100 Ah 23,552 Wh / 230 Ah Nominal Voltage 102.4 V 102.4 V Weight 100 kg 180 kg Lifespan 3,000 cycles (@ 80% DOD) 3,500 cycles (@ 80% DOD) Dimensions (mm) 680 x 500 x 300 1287 x 366 x 295 Max. discharge current 100 A 230 A Parallel connection Up to 8 units per cluster Up to 8 units per cluster
Usage & Compatibility
-
Motors: Suitable for 96Volt systems from 10kW to 40kW.
-
Smart Communication: Via the CAN bus ports, the battery communicates directly with the engine and charger for real-time data such as state of charge (SoC) and voltage.
-
No Series Connection: The G-series batteries operate at a high voltage (102V) and may only be connected in parallel , not in series.
Please note: For warranty and safety reasons, these batteries may only be charged with official ePropulsion chargers.
-
-
Charger
-
To charge a G102 battery at 220V with a 16AMP charger, you need 16x220V = 3520W (real power without loss). It can also be connected to a generator with pure sine wave output.
- Input voltage (AC): 185V - 255V (220V), so simply plug it into a wall socket. With an input voltage of 110VAC to 220VAC, it can be used worldwide.
- Battery charger manual
- Brochure
- Battery cables 0.5 meters GB-CP01-00 (+ € 199)
- Battery cables 1.5 meters GB-CP02-00 G (+ € 299)
- Battery cables 5 meters GB-CP03-00 G (+ € 499)
- Battery charger (+ € 675)
Specification G102-100 G102-230 Capacity 10,240 Wh / 100 Ah 23,552 Wh / 230 Ah Weight 100 kg 180 kg Dimensions (LxWxH) 680 x 500 x 300 mm 1287 x 366 x 295 mm Lifespan (Cycles) 3,000 cycles (at 80% DOD) 3,500 cycles (at 80% DOD) Max. discharge current 100 A (continuous) 230 A (continuous) Final charge voltage 115.2 V 115.2 V Cut-off voltage 83.2 V 83.2 V Charging temperature 0°C to 55°C 0°C to 55°C Discharge temperature -10°C to 60°C -10°C to 60°C Parallel Connection Up to 8 units per cluster Up to 8 units per cluster Serial Connection Not possible (N/A) Not possible (N/A) -
In stock
Couldn't load pickup availability
