ePropulsion Man Overboard Wristband

The wristband stops the engine in case of an emergency. A connection with 8 wristbands per engine can be made simultaneously.
This ePropulsion Wristband with Deadman Switch is waterproof (IP67) and communicates wirelessly with ePropulsion Spirit Evo and Navy Evo Tiller Control Handle and ePropulsion Navy, Pod Drive, Spirit Evo Remote top remote control
The wristband does not work with ePropulsion Side Control for Spirit Evo, Navy Evo and Pod Drive Evo or ePropulsion Evo Dual Remote Control.

Weight 26 grams
Dimensions: 67*23*64 mm
Wireless
Wireless frequency: 2.4 Ghz
Communication distance: 10 meters
Working temperature: -20 degrees Celsius to 45 degrees
Charging voltage: 5 Volt
Charging current: 80 mA
Charging time: 2 hours
Battery life: 100 hours
IP67 waterproof: completely dustproof and waterproof up to 1 meter depth
Can be charged via a USB-A port
Product number NE-SW00-00
EAN number 6971312631852

Manual:
Power on: Short press the button of the wristband, the red light of the wristband lights up for 1 second, then the green lights flash quickly for 30 seconds, and the green light flashes every 5 seconds finally. The wristband works normally.
Power off: When the wristband is on, press and hold the wristband button (5 seconds) until the green light is always on, then release the button and the red light flashes 3 times. The wristband will be turned off.
Emergency stop:1. Press the wristband buttonWhen the wristband is on, short press the wristband button until the red light is always on, the motor will stop immediately.
2. Communication is interruptedWhen communication between the wristband and the outboard motor is interrupted, the motor will stop automatically. This protects passengers when they cannot press the button (e.g. man overboard).
To link
1. Turn on the Evo Remote Control / Evo Tiller, and then press and hold the UP and OK buttons to enter the wristband pairing interface. 2. The interface shows the wristband logo and "SE" symbol. 3. Put on the wristband. If the wristband is not paired, the red and green lights flash alternately after power on. Meanwhile, the wristband is pairing. 4. When the wristband logo and "SUC" logo are displayed, the wristband is 5. successfully paired. Then the wristband will automatically turn off. It can be used normally after turning on again. • If the Evo Remote Control / Evo Tiller does not change the display within 2 seconds, you can keep pressing the OK button to try again until it succeeds.
If the wristband needs to be paired with another Evo RemoteControl / Evo Tiller, press and hold the button of the wristband (10s) when the wristband is off, then the red and green lights will flash alternately for three times. The wristband will erase the original pairing information and shut down automatically.
Warnings:1. The first time you use the wristband, you need to pair it with the Evo Remote Control / Evo Tiller.2. The wristband can be charged by connecting to a 5V USB port.3. Do not drop, impact, puncture the product.
Warranty: ePropulsion Safety Wristband is warranted against any manufacturing defects for TWO years from the date of purchase.


COLLECTION ONLY IN NIJMEGEN