Included at Marinaut
- Rigging Cord Kit A 3VS-84560-0 or Side Mount Kit A 3VS-83900-0, depending on the version
- Propeller
- 24-litre fuel tank
- Engine oil
- Delivery inspection, including checking the gear oil, among other things
Delivery inspection worth €145 included free of charge.
Which version is right for your boat? When choosing, check the shaft length, control type, and starting method. The supplied control components are matched to the chosen version. Ask for advice on the correct version.
Tohatsu MFS25D 4-stroke outboard motor
A high-performing and user-friendly engine.
New features such as variable idling speed, front-mounted shift lever, and water flushing system ensure a quiet and stable outboard motor that is also quick and easy to clean after use in salt water.
The newly optimized gear ratio (26:12 / 2.17) provides more power and torque and, according to Tohatsu, was developed for strong performance within the 25/30 hp class. The optimized gear ratio is focused on a good combination of acceleration, top speed, and efficiency.
As a rule of thumb, for fast-planing boats, you need 1 hp for every 10 to 20 kilograms of total weight. Based on this, this outboard motor is suitable for a total weight of 250 to 500 kilograms.
For displacement hulls, 1 hp per 150 to 200 kilograms is sufficient; in that case, the engine is suitable for a total weight of 3.75 to 5 tonnes.
A fast engine suitable for water sports, including water skiing or wakeboarding (for boats with a speed from 20 km/h for beginners to 35 km/h and above for advanced users).
With the 540 sloop with a boat weight of 425 kilograms, you can reach a top speed of over 40 km/h with a 25 hp outboard motor.
Specifications
- Power: 25 hp
- Lubrication: 4-stroke
- Weight: 58 to 68 kilograms
- Starting: electric or manual
- Steering type: remote control or tiller
- Gear shift: Forward - Neutral - Reverse
- Fuel system: Injection, so no carburetor
- Number of cylinders: 3
- Displacement: 526 cm³
- Maximum output: 18 kW
- Full throttle RPM: 5000-6000 RPM
- Bore × stroke: 61x60 mm
- Trim/tilt method: manual or Power Trim & Tilt, depending on version
- Shaft length: S (15" = 38 cm) L (20" = 51 cm)
Versions
The transom height of the boat determines the required shaft length. Around 38–43 cm, a short shaft is usually suitable, and around 51 cm, a long shaft.
- S: short shaft, tiller control, and manual start.
- L: long shaft, tiller control, and manual start.
- ETL: long shaft, electric start, remote control, and Power Trim & Tilt. For steering wheel control, mechanical cable or hydraulic steering can be used.
Big Multi Tiller A
For the ETL version, a Big Multi Tiller A is available. This tiller combines electric start, trim/tilt operation, warning lights, a key switch, adjustable height, and a longer throttle handle, among other features.
- Aqua Blue: 3VVQ63000-0
- Beluga White: 3VWQ63000-0
- Surcharge: €695
Trim gauge: optional for €429, including trim sensor.
Excluding: starter battery.
Optional TOCS 4.3-inch LCD display
TOCS 4.3-inch LCD color display featuring engine RPM, engine temperature, battery voltage, fuel consumption, operating hours, fuel level, speed, alerts, and self-diagnosis. Supports NMEA 2000 and J1939 CAN Bus.
Key technology of the MFS25D
- Electronic fuel injection without a separate starter battery for manual start versions
- Variable idling speed
- Thermostat-controlled water cooling
- Built-in freshwater flushing system
- Adjustable steering friction
- Stainless steel water pump housing
- Warning system for oil pressure, overheating, and battery voltage, among others
- Power Trim & Tilt on the ETL version
Engine control and intake
The 16-bit ECU regulates fuel injection and ignition timing. The tuned intake manifold supports torque at low and mid-range RPMs. The built-in freshwater flushing system makes routine flushing easier.
Why Tohatsu
- Over 100 years of experience: Tohatsu is a Japanese manufacturer with a long history in engine engineering and produces outboard motors for the global market.
- Strong position in the Netherlands: According to Dutch boat tests, Tohatsu has a market share of approximately 16%, meaning about 1 in every 6 outboard motors sold.
- Mercury 9.9 to 30 hp is produced by Tohatsu: The Mercury FourStroke models from 9.9 to 30 hp are produced by Tohatsu Marine Corporation and use the same technical base and engine platforms as the corresponding Tohatsu models. The engine block and many main components are technically identical, while the cowling, branding, trim, and certain parts may differ per model.
- Specialist in outboard motors: Tohatsu offers a wide range for sloops, tenders, RIBs, workboats, and water sports.
- Proven technology: Depending on the model, Tohatsu uses features such as electronic fuel injection, efficient cooling systems, variable idle control, and electronic engine monitoring.
- Favorable weight-to-power ratio: According to the manufacturer, various Tohatsu models are among the lighter versions within their power class.
- Wide range of versions: Depending on the model, short shaft, long shaft, tiller, remote control, and Power Trim & Tilt are available.
- Good price-performance ratio: Tohatsu combines modern technology and comprehensive standard equipment with a competitive price.
- Service via Marinaut: Marinaut provides advice on the correct version, propeller, and installation and can handle maintenance and parts.
Warranty & delivery time
New Tohatsu outboard motors come with a 5-year manufacturer's warranty according to the applicable warranty terms.
Delivery time upon consultation. Please contact us by phone at 024 799 8041
via email info@marinaut.nl or via chat (bottom right).
Brochure and manual
View the brochure and the manual here
TIP: consider the attractively priced Tohatsu 30 hp outboard motor MFS30D