The Combi Nautic Steerable POD is an electric steerable pod drive. The series includes power ratings from 1 to 15 kW. Installation and control are tailored to the vessel, for example, when installed at the position of the rudder trunk.
Battery and installation: The battery is separate and not included. View the scope of delivery and required components.
Steerable propulsion
Because the pod can rotate, the direction of the thrust can be adjusted. The mechanical steerability of the pod is 360 degrees. The actual available steering angle depends on the chosen steering system. A steering cylinder or other steering mechanism is not included.
The motor is infinitely variable. Within the Combi Nautic series, asynchronous three-phase motors and synchronous brushless permanent magnet motors are used; the motor type depends on the model.
Model details
The data below is based on existing product information. Please have the specifications of the desired model confirmed before ordering.
| Model | Power | Voltage | RPM | Nominal current |
|---|---|---|---|---|
| CN1000 | 1 kW | 24 V DC | 1,050 rpm | 42 A |
| CN1500 | 1.5 kW | 24 V DC | 1,350 rpm | 63 A |
| CN2000 | 2 kW | 48 V DC | 1,150 rpm | 42 A |
| CN2500 | 2.5 kW | 48 V DC | 1,500 rpm | 52 A |
| CN3000 | 3 kW | 48 V DC | 1,050 rpm | 63 A |
| CN3500 | 3.5 kW | 48 V DC | 1,310 rpm | 73 A |
For the CN1500, the product information specifies rudder shaft lengths of 0.45, 0.55, 0.70, and 1.00 meters, by consultation. For the other models up to 15 kW, please request the corresponding dimensions and technical data.
Customizing model and price
No selection per power rating has been set on this page. Therefore, please have it confirmed before ordering which model, rudder shaft length, and scope of delivery correspond to the price shown.
The Combi Nautic series also includes a pod for fixed mounting. Please indicate in your request whether you are looking for a steerable or fixed version.
Separately not included
- Battery or battery bank
- Steering mechanism, such as a steering cylinder
- Monitoring set for the motor, model 840
- Control panel for side mounting, article 220500001
- Control cable set BK200, article 220204901 (2.5 meters / 1 meter)
- Rudder blade for Combi Nautic 1000/1500
According to the product information, the monitoring set displays operating hours, RPM, voltage, consumption, battery percentage, and error codes, among other things. Coordinate the operation, cabling, and battery selection with the chosen model.
Advice and ordering
Ask for advice on the complete installation. Provide the type and weight of your boat, the existing propulsion, available installation space, and the desired speed and range.